Dedicated flame lovers may already know this but to make sure your candle burns evenly, you want to follow these 3 basic candle principles: trim, center, and wait.
1. TRIMMING YOUR WICK
Do you like burning money? Didn't think so. Do yourself a favor and trim your wick 1/8" inch before each burn. You can use a wick trimmer or even a pair of scissors. This will ensure that your candle burns a little longer and safer. We hand cut each candle wick before delivery so your first burn should be ok but make sure to keep it cut after, if it gets too long. Optimal wick length should be under a centimeter. It is helpful to do this before you light your candle as you don't want the debris to fall into the wax when it is lit.
2. CENTER YOUR WICK
Making sure your wick is centered will allow for frictionless fragrance throw. You can do this quickly before each burn by gently guiding the wick back into place towards the center of the candle. Keeping your candle wick centered ensures that your candle will burn evenly throughout and not burn more on one side. This is important because if your wick gets too long or out of place, it could cause the glass to heat too quickly on one side and crack.
3. RELAX AND WAIT UNTIL YOUR CANDLE IS FULLY MELTED
This is the MOST critical step. The first time you burn your candle make sure to wait at least 3-4 hours or until the wax pool liquefies to the edge of your glass. Once the wax pool is completely melted on the top, then you can blow out your candle.
Why is this the most important step you ask? Because if you blow out a candle too quickly, the wax has "memory" and will stay in this position for the length of your burn. Freaky, right?
Once your candle has this memory ring, it will continue to tunnel downwards throughout the life of the candle. A good rule of thumb is to burn the candle one hour for every inch of diameter of the vessel.